Technika a řešení pro vás

News

Propeller sensor MBA 3.2 Ex / Z10

Print | Email
Originally manufactured level sensor from MAIHAK, later MAIHAK-SICK for horizontal installation. The sensor has not been manufactured for many years, but there is a replacement in the new series. You can use the parameters below to correctly identify the replacement.

 

MBA 3.2 Ex/Z10 a MBA 3.2 s Ex/Z10 / CSA pro CSA normu

Technical data

Grain size:
30 mm
Working position: lateral - horizontal MBA 3.2 Ex / Z10
lateral horizontal at sloping wall 65 ° MBA 3.2 with Ex / Z10
Blade lenght: 85 mm, 250 mm, 350 mm, 450 mm, 600 mm
Blade size: 98mm x 40mm nebo 250mm x 100mm for lightweight materials
Submerged material:
 verze -N-: smooth steel
verze -R3-: all submerged stainless steel parts
Evaluation part material:
 Al cast
Protection DIN 40050:
Evaluation part IP 54, submerged part IP 65
Flange: Flange DN 125 PN6
Napájení: 230VAC, 115VAC, 24VAC, 42VAC, s tolerancí 15%, 50/60 Hz, 12VDC, 24VDC, 60VDC, s tolerancí 5%
Power supply: 3 VA
Transport and storage temperature:
 - 20°C...+60°C
Material temperature:
 max.+80°C - (does not apply to special designs)
Ambient temperature:
 max.+60°C - (does not apply to special designs)
Overpressure in the tank: max. 0,8 bar (0,08 MPa) - (does not apply to special designs)
Products since 2000:
 max. 0,8 bar (0,08 MPa)
Weight: ca. 32,5 kg
Special Ex design
Options:
High temperature:

MBA 3.2 DT Ex - 3 bar (0.3 MPa), 200 ° Cthis type can be used for flammable environments
dust explosion hazard zone 10
the evaluation unit may be in zone 11
Unpainted: B3
Tropical protection:
 B4
Run control: E2
Electric heating: H
Orders:
Design:
(standard or special design)		  
Embodiment-N- or -R-:  
Flange or thread:  
Impeller length:  
Impeller size:  
Power supply:  
Options:  

Designed by Jaromír Ludík.